Aroflit™ AquaGlide Smart Cordless Robotic Pool Cleaner
Spend less time scrubbing and more time enjoying your pool with the Aroflit™ AquaGlide Smart Cordless Robotic Pool Cleaner. Designed for above-ground and in-ground pools, this advanced cordless cleaner helps remove dirt, sand, leaves, hair, and other common debris from the pool floor, walls, waterline, steps, and slopes.
With a rechargeable battery, smart route planning, five cleaning modes, app-based controls, triple-motor power, obstacle avoidance, and a large top-load filter basket, the Aroflit™ AquaGlide is designed to simplify routine pool maintenance from start to finish.
There are no long power cables to untangle while the robot is cleaning. Charge the unit, select your preferred mode, place it in the water, and let the robotic cleaner handle the hard work. When the cleaning cycle is complete, the smart self-parking feature helps position the unit near the pool wall for easier retrieval.
The Grey with White design gives the cleaner a clean, modern appearance that fits naturally into your pool-care setup.
Important Pool Compatibility Notice: This cleaner is designed for suitable above-ground and in-ground swimming pools with a maximum cleaning area of approximately 1,614 sq. ft. and a maximum supported water depth of approximately 9.8 ft. Pool shape, surface material, slope, steps, debris level, water chemistry, and operating conditions can affect performance. Review the user manual before first use.
Why Choose the Aroflit™ AquaGlide?
-
Four-in-one cleaning coverage: floor, walls, waterline, and steps
- Suitable for above-ground and in-ground pools
- Cleans pools up to approximately 1,614 sq. ft.
- Up to approximately 150 minutes of runtime
- Recharge time of approximately 3 hours
-
Triple-motor system for stronger movement and climbing
-
Smart S-path and N-path navigation for efficient coverage
-
Five cleaning modes for flexible pool-care routines
-
App control and scheduled cleaning for added convenience
-
Self-parking function for easier retrieval
-
Large top-load filter basket with 180 μm filtration
-
Dual PVC brushes designed to grip common pool surfaces
-
Obstacle-avoidance system for smoother navigation
Comprehensive Four-in-One Pool Cleaning
Pool maintenance involves more than cleaning the bottom surface. Dirt can gather along the walls, collect around the waterline, settle near steps, and build up in difficult-to-reach areas.
The Aroflit™ AquaGlide is designed to clean floors, walls, waterlines, and steps. Its triple-motor system helps the robotic cleaner move around the pool and climb suitable surfaces, while the dual PVC brushes help loosen common debris.
The cleaner is designed to handle suitable slopes of up to approximately 45 degrees. This can be useful for pools with sloped floors, transitions, and other common design features.
Pool shape and surface material can influence climbing performance. Install the included floating accessories when required by the instruction manual, especially when using the cleaner on smooth wall surfaces.
Smart Route Planning for Efficient Coverage
Random movement can leave areas untouched. The Aroflit™ AquaGlide uses smart route-planning technology and high-precision sensors to move more efficiently around the pool.
The cleaner uses an S-shaped path while cleaning the floor and an N-shaped path while cleaning suitable walls. This structured navigation pattern is designed to reduce unnecessary movement and improve overall coverage.
The system is designed to map the pool shape and provide coverage of up to approximately 98% under suitable conditions.
The robot also includes enhanced obstacle avoidance to help navigate around drains and reduce the chance of becoming stuck during a cleaning cycle.
Five Cleaning Modes for a Customized Routine
Every pool-care session is different. Sometimes the floor needs attention. On other days, you may want a more complete cleaning cycle that includes the walls and waterline.
The Aroflit™ AquaGlide includes five selectable cleaning modes:
-
Full Cleaning Mode for comprehensive pool coverage
-
Floor Cleaning Mode for routine bottom-surface maintenance
-
Wall Cleaning Mode for suitable vertical surfaces and waterline areas
-
Wall-Then-Floor Mode for an organized multi-stage cleaning cycle
-
Eco Floor Mode for an energy-conscious floor-cleaning routine
Select the preferred mode using the controls or compatible mobile app before placing the cleaner in the pool.
The app also supports scheduled cleaning for up to four cycles per week, helping you create a more consistent pool-maintenance routine.
Powerful Suction for Common Pool Debris
Sand, leaves, dirt, hair, and other debris can quickly affect the appearance of your pool. The Aroflit™ AquaGlide includes an upgraded independent water pump designed to provide strong suction for everyday pool maintenance.
The cleaner provides a suction flow of approximately 3,038 gallons per hour. Combined with the dual PVC brushes, this helps lift common debris from suitable tile, mosaic, glass, and other compatible pool surfaces.
Actual performance may vary depending on the debris type, quantity, water conditions, pool surface, brush condition, and selected cleaning mode.
Large Top-Load Filter Basket
Cleaning the filter should not feel like another difficult chore. The Aroflit™ AquaGlide includes a large top-load filter basket with a 180 μm mesh filter.
The filter is designed to collect common debris while remaining easy to access. When the cleaning cycle is complete, open the top compartment, remove the basket, rinse it thoroughly, and reinstall it after cleaning.
No specialized tools are required for routine filter-basket cleaning.
Rinse the filter after each use for best results. A clean filter supports reliable suction, efficient water flow, and consistent performance.
Up to 150 Minutes of Cordless Cleaning
The Aroflit™ AquaGlide includes an upgraded rechargeable battery designed to provide approximately 120–150 minutes of continuous runtime, depending on the selected cleaning mode and operating conditions.
This gives the robot enough time to clean pools of up to approximately 1,614 sq. ft. under suitable conditions.
Once the battery is depleted, remove the cleaner from the pool, dry the charging port carefully, switch the unit off, and connect the charger according to the instruction manual.
A complete recharge takes approximately 3 hours.
Smart App Control
Customize your cleaning routine using a compatible mobile app.
The app allows you to select supported cleaning modes, customize the cleaning cycle, schedule automatic operation, and receive supported over-the-air updates.
App control makes it easier to prepare the cleaner before placing it in the water and manage your preferred pool-maintenance routine from your phone.
Wireless control availability may vary while the cleaner is submerged. Configure supported app features before placing the cleaner into the pool.
Self-Parking for Easier Retrieval
Pulling a robotic cleaner from the center of the pool can be inconvenient. The Aroflit™ AquaGlide includes a smart self-parking feature.
When the cleaning cycle is complete or the battery level becomes low, the cleaner is designed to move closer to the pool wall, making retrieval easier.
Use a suitable retrieval tool or the approved handle according to the user manual. Do not lift or pull the unit by the charging cable.
Suitable for Common Pool Shapes and Surfaces
The Aroflit™ AquaGlide is designed for a wide variety of common pool layouts, including rectangular, round, oval, and irregularly shaped pools.
The dual PVC brushes help the cleaner grip suitable tile, mosaic, glass, and other compatible surfaces.
Pool construction, surface texture, waterline design, steps, drains, and slope angles can affect cleaning performance. Monitor the first cleaning cycles and select the most appropriate mode for your pool layout.
Technical Specifications
| Product Name |
Aroflit™ AquaGlide Smart Cordless Robotic Pool Cleaner |
| Color |
Grey with White |
| Pool Compatibility |
Suitable above-ground and in-ground swimming pools |
| Maximum Pool Coverage |
Up to approximately 1,614 sq. ft. |
| Maximum Water Depth |
Up to approximately 9.8 ft. |
| Cleaning Coverage |
Pool floor, walls, waterline, steps, and suitable slopes |
| Cleaning Modes |
Full, Floor, Wall, Wall-Then-Floor, and Eco Floor |
| Navigation Paths |
S-path for pool floors and N-path for suitable walls |
| Maximum Runtime |
Approximately 120–150 minutes, depending on operating conditions |
| Approximate Charging Time |
Approximately 3 hours |
| Suction Flow |
Approximately 3,038 gallons per hour |
| Filtration |
Large top-load filter basket with 180 μm mesh |
| Brush System |
Dual PVC brushes |
| Motor System |
Triple-motor system |
| Maximum Supported Slope |
Up to approximately 45 degrees under suitable conditions |
| App Control |
Compatible mobile app with supported scheduling and OTA updates |
| Scheduled Cleaning |
Up to four cycles per week |
| Self-Parking |
Yes |
| Robot Weight |
Approximately 17.6 lb |
| Approximate Product Dimensions |
Approximately 17 × 13 × 18 inches |
Before First Use
Read the user manual carefully before operating the cleaner. Charge the battery fully, confirm that the charging port is dry, and install any included accessories required for your pool surface.
Remove large objects, pool toys, loose cables, and other obstacles from the water before starting the cleaning cycle.
Keep swimmers out of the pool while the cleaner is operating. Do not charge the unit near water, and never connect the charger while the cleaner is wet.
After each use, remove the cleaner from the pool, rinse the filter basket, clean the brushes, allow the charging port to dry completely, and store the unit in a cool, dry area away from direct sunlight.
Shipping Information
We offer fast and reliable shipping on all orders!
USA Addresses: Estimated delivery within 7–10 business days after your order is processed.
International Orders: Estimated delivery within 10–15 business days.
All taxes and duties for international orders are already paid by our company—you will not face any additional charges upon delivery.
Every order is carefully packaged and shipped with tracking for your peace of mind. If you have any questions about your order status, please contact our customer-support team at any time.
Satisfaction Guaranteed
We want you to feel confident when placing your order. Your purchase is supported by our 30-day satisfaction guarantee, subject to our published return and refund policy.
If you experience an issue with your order, please contact our customer-support team within 30 days of delivery. We will review the situation and help identify an appropriate solution.
Customer Support
Our customer-support team is available to assist with questions about your order, shipping status, charging, app setup, cleaning-mode selection, retrieval, filter maintenance, and general operation.
Choose the Aroflit™ AquaGlide for cordless convenience, smart pool coverage, and a simpler way to keep your pool ready to enjoy.
