Features of the mini drone：
1. 3D Flip Function
(Note the quadcopter must fly to a height of at least 3m (10ft) to operate this function). To activate: press the 3D flip button.
Push the right joystick to perform a 360 degrees flip in a corresponding direction.
2. Headless Mode
To activate: press the headless mode button on the controller and wait for continuous beep sound. Headless function is activated,
eg. when the user pushes the right joystick forward,the drone will fly forward regardless of the position of the front LED
light.Press the same button again to exit the mode(continuous beep sound will stop).
If the direction of the drone is in accurate in headless mode, land safely and follow the steps for calibration in the flight preparation section.
3. One Key Return
Press the one-key return button, the drone will fly toward its back direction. The drone will not stop until the right stick is moved and the mode is cancelled.
4. Speed Select
The drone is set to low speed by default. Press left joystick down once for medium speed, press down again to high speed.
5. Pressure Altitude Hold
This mode helps the quadcopter to maintain a (roughly) consistent altitude.
The user can control the roll and pitch, lean angles and heading.